Magnum ME3112 3100W Inverter 12v W/160A PFC Charger
The ME Series Inverter/Charger from Magnum Energy is a new generation inverter designed specifically for rugged mobile applications. The ME Series is powerful, easy-to-use, and best of all, cost effective.
Safe and reliable: The ME Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01, ensuring that the inverter is safe and reliable.
Easy-to-install: Install the ME Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter's
easy-to-reach terminal block, connect the batteries, and switch on the power.
The ME Series Inverter/Charger is loaded with features:
Power Factor Corrected (PFC) Charger: The charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger - using only 15 amps per 100 amps versus 23 amps used by standard chargers.
Choices: The ME Series comes in three power models, allowing you to choose the model that is right for you.
Versatile mounting: Mount the ME Series on a shelf, bulkhead, or even upside down.
Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
Multiple ports: The ME Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
Convenient switches: The ME Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
Expanded transfer relay: 60 Amp transfer service is available on all models.
Buy with ease: The ME Series is backed by a three-year (36-month) limited warranty.
Accessories and Options*
Remote control: For convenient finger-tip operation, including the new one-knob? programming.
AGS module: Automatically starts and stops your generator based on temperature or battery voltage.
|Input battery voltage range||9 - 16 VDC||9 - 16 VDC||9 - 16 VDC|
|Nominal AC output voltage||120 VAC||120 VAC||120 VAC|
|Output frequency and accuracy||60 hz 0.1Hz||60 hz 0.1Hz||60 hz 0.1Hz|
|1 msec surge current (amps AC)||60||100||120|
|100 msec surge current (amps AC)||37||45||50|
|5 sec surge power (real watts)||3700||5000||6000|
|30 sec surge power (real watts)||3450||4500||4800|
|5 minute surge power (real watts)||3100||3500||3950|
|30 minute surge power (real watts)||2400||2900||3500|
|Continuous power at 45° C||2000 VA||2500 VA||3100 VA|
|Maximum continuous input current||266 ADC||333 ADC||413 ADC|
|Inverter efficiency (peak)||95%||91%||90%|
|Transfer time||16 msecs||16 msecs||16 msecs|
|Search mode ( Typical)||5 watts||5 watts||5 watts|
|No load ( 120 VAC output ) Typical||20 watts||23 watts||25 watts|
|Wave Form||Modified Sine Wave|
|Continuous output at 45° C||100 ADC||120 ADC||160 ADC|
|Power factor||> .95||> .95||> .95|
|Input current at rated output (AC amps)||15||18||21|
|General Features and Capabilities|
|Transfer relay capability||2 legs at 30 A for 120 V/30 A or 240 V/60 A service|
|Five stage charging capability||Bulk, Absorb, Float, Equalize, and Battery Saver™|
|Battery temperature Compensation||Yes, 15 foot battery temp sensor standard|
|Internal cooling||0 to 120 cfm variable speed drive using dual 92mm brushless DC fans|
|Overcorrect protection||Yes, with two overlapping circuits|
|Conformal coating on PCB's for corrosion protection||Yes|
|Over temperature protection||Yes, On Transformer, MOSFETS, and battery|
|Stainless steel fasteners for corrosion protection||Yes|
|Dual AC branch rated output breakers||On the ME2012-20B only - AC breakers in 20 amp ratings|
|Listings||ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01|
|Operating temperature||-20° C to +60° C (-4° F to 140° F)|
|Nonoperating temperature||-40° C to +70° C (-40° F to 158° F)|
|Operating humidity||0 to 95% RH non condensing|
|Dimensions (h x w x d)||13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm)|
|Mounting||Shelf (top or bottom up) or bulkhead (vents up)|
|Max operating altitude||15,000 feet|
|Weight||37 lb||41 lb||46 lb|